深圳市特了得自动化有限公司
革新生产 创造价值
产品展示
当前位置: 首页 » 产品展示 » 桌面式自动锁螺丝机 » 气吹式自动锁螺丝机
坐标气吹式自动锁螺丝机

坐标气吹式自动锁螺丝机

型号:TLD-5331C
坐标气吹式自动锁螺丝机适用于玩具、汽车连接器、汽车灯、门板、家用电器、面板灯等产品的自动锁螺丝。设备运行稳定,具有效率高,成本低等优势。
详细介绍

 

台式螺丝机Desktop Screw Machine

TLD-5331C 精准4TLD-5331C Accurate 4-axis

加工范围Processing range X/Y/ /Z/R

300mm/300mm/100mm(可定制Customizable)

Y轴平台最大负载Y-axis platform maximum load

15KG

XY/Z轴移动速度axis movement speed (mm/sec)

0-1200

XYZ轴重复精度Axis Repeatability

<±0.02mm

控制方式Control Mode

PLC/工业控制卡Industrial Control Card

编程方式Programming method

触摸屏/手持编程器Touch screen / handheld programmer

程序记录容量Program recording capacity

999组程序999 programs

马达系统Motor system

步进级精密马达Stepping precision motors

传动方式Transfer method

高精度同步带或精密级丝杆+直线导轨。High precision synchronous belt or precision grade wire rod + linear guide rail

电批Electric batch

日本HIOS或奇力速(客户也可指定) HIOS from Japan or Kilews

 (Customers can also specify)

批头Batch head

日本进口Import from Japan

输入电源Input power

AC220V(内部开关转换Internal switch conversion)

工作环境温度Working temperature

5-40℃

外形尺寸Dimensions

L680*W760*H820

机器重量Machine weight

70KG

 

功能特点Functions and characteristics

1、高精准的电动起子,可控制扭矩提供给客户稳定而高精度的品质保证。High-precision electric screwdriver ,can control torque to provide customers with stable and high-precision quality assurance.


2、电批带螺丝滑牙、浮锁检测功能的系统:当螺丝打不良(漏锁、滑牙、浮锁)时,系统会自动暂停并且报警。Electric batch system with screw sliding and floating lock detection function: When the screw is bad (leak lock, slide tooth, float lock), the system will automatically pause and alarm.


3、锁嘴采用进口高强度钢,经热处理硬度可达HRC60度,经久耐磨、耐用。The lock mouth imported high-strength steel, heat treatment hardness of up to HRC60 degrees, durable wear and durability.


4、分料器采用耐磨不锈钢,分料定位精准。The distributor adopts wear-resistant stainless steel, and the material is accurately positioned.


5、本产品采用吹气式锁附效率高,且能快速排除螺丝故障,当故障排除后,能直接在原错误点继续动作。This product uses blow-type lock with high efficiency, and can quickly eliminate the screw failure, when the fault is removed, can continue to action at the original point of error.


6、螺丝通用性强,更换分料器、锁嘴、批头即可适应M1.5~M6,长径比大于1.3的螺丝锁附。The screw has strong versatility, replace the feeder, lock nozzle, and the batch head can accommodate M1.5~M6, and the screw with the aspect ratio greater than 1.3.


  • 上一篇:没有了
  • 下一篇: 桌面伺服自动锁螺丝机
  • 公司首页 关于特了得 产品展示 立式多轴螺丝机 桌面式螺丝机 公司实力 成功案例 新闻中心 在线留言 联系我们